Additional Colours More Colours Available Paint Technique Finishes, Wood Stain Colours

Plain Traverse Rebate Curtain Rods, 90mm (3 1/2") Diameter Available 1m, 1.5m, 2m, 2.5m, 3m, 3.5m, 4m Lengths Cut to Size, No Extra Charge Fluted Traverse Rebate, 90mm (3 1/2") Diameter Available 1m, 1.5m, 2m, 2.5m, 3m, 3.5m, 4m Lengths Cut to Size, No Extra Charge All 90mm (3 1/2") Profiles Available Round

Traverse Curtain Rods for Easier Draw Curtains. May be used for Single, Double and Triple Curtain Rails.
Below is a Traverse Curtain Rod attached to a Double Rail.


Traverse, Rebate Pole Profiles

Curzon offers a range of Traverse Curtain Rods, also known as Rebate Poles, which are supplied to cover and disguise the use of practical but unattractive Rails. Therefore, the main use and reason for Traverse Curtain Rods is to create a more decorative and appealing appearance as they are used to cover either single, double or triple Rails, to allow free drawing, uninterrupted opening and closing of Drapes. Also, Curzon apply Gilded Finishes to our Drapery Hardware Poles so the use of Rings for working curtains are not suggested, as the Gilded Finish will rub off in time. So, the use of Rebate or Traverse Curtain Rods with Gilded Finishes prevents this problem.
The bulk of Curzon supply is Traverse Curtain Rods and Rebate Poles as the application is more practical and easier to draw open and close curtains, than the use of Round Drapery Hardware Poles with Drapery Rings, which tend to stick and not offer a free gliding motion to your curtain.
Traverse Curtain Rods only apply to 90mm (3 1/2") and 63mm (2 1/4") Diameter Drapery Hardware Rods

Traverse/Rebate Curtain Rod Installation Instruction
1. Install assembled Curtain Rail and Brackets onto wall
2. Remove Curtain Rail (Front Rail if Double Track) only, leaving Brackets installed on wall
3. Attach Traverse/Rebate Rod onto Brackets, fitted to the wall
4. Replace Curtain Rail to Brackets.